Wooden Watch User Manual/ Warranty

NATURE GROWN, MAN MADE

High Quality Wooden Statement Timepieces Manufactured From The Best Quality Wood.

We ensure that the woods used in the production of our watches are acquired in the legal way.

For Simple Watch no date

 To set the time:

1. PULL out crown to B position.
2. TURN crown either way to correct time.
3. Push in crown to A position.

Watch With Date

To set the time:

1. PULL out crown to C position.
2. TURN crown either way to correct time.
3. Push in crown to A position.

To set the calendar / date:

1. GENTLY PULL out crown to B position.
2. TURN crown counter clockwise or towards you to correct date.
3. PUSH in crown to A position.

NOTE: The date will change automatically every 24 hours

CHRONOGRAPH Watch with Date/Day/24HR (Does not apply to photo watches)

To set the time:

1. PULL out crown to C position.
2. TURN crown either way to correct time.
3. Push in crown to A position

To set day:

1. PULL out crown to C position.
2. Advance time 24 hours to change the day.
3. PUSH in crown to A position.

NOTE: 24 hour indicator can change only when setting the time.

The Set The Date:

1. GENTLY PULL crown out to the B position
2. Turn crown counter clockwise to correct date
3. PUSH crown into A position

Three Eye Chronograph with Date

This chronograph watch has 2 functions: TIME, STOPWATCH. The left eye (stopwatch hand) measures minutes elapsed on stopwatch, up to a maximum of 60 minutes. The center eye (stopwatch hand) measures seconds elapsed on stopwatch, up to a maximum of 60 seconds. It also shows measurement of elapsed time. The right eye (24 hour hand) indicates time on a 24 hour basis. 

TIME

To set the time:

1. PULL Crown to C position.
2. TURN Crown either way to correct time.
3. PUSH Crown in to A position.

NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours.

CALENDAR

To set the calendar:

1. PULL out Crown to B position.
2. TURN Crown clockwise to correct date.
3. PUSH in Crown to A position.

NOTE: The date changes automatically every 24 hours.

STOPWATCH

The stopwatch is capable of measuring:

Minutes elapsed up to one hour (left eye).

Seconds elapsed up to one minute (bottom eye)

BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “12 o’clock” positions.

To reset stopwatch hands:

1. PULL Crown to position B.
2. PRESS Pusher “A” or “B” intermittently until the stopwatch minute and second hand is reset to   “O”

NOTE: By pressing Pusher “A”, the hands move counter clockwise. By pressing Pusher “B”, the hands move clockwise.

Standard stopwatch measurement:

1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “A” to stop timing.
3. PRESS Pusher “B” to reset.

Split time:

1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “B” to stop split.
3. PRESS Pusher “B” to begin again.
4. PRESS Pusher “A” to stop.
5. PRESS Pusher “B” to reset.

Accumulated elapsed time measurement:

1. PRESS Pusher “A” to start timing.
2. PRESS Pusher “A” to stop timing.
3. PRESS Pusher “A” to restart timing.
4. PRESS Pusher “A” to stop 2nd timing.

PRESS Pusher “B” to reset.

CARE INSTRUCTIONS:

Water Resistant at 3ATM: Dusty Saw Watches are splash-proof; do not submerge in water. No swimming or showering while wearing your watch.

Cleaning: We recommend that you use orange or lemon oil extract to clean your wooden watch.

Storage: To avoid cracks please ensure the watch is stored properly. Avoid extreme temperatures. Do not store your watch in extremely cold, hot or humid places.

 WARRANTY

Dusty Saw Watches come with a 1 year manufacturer’s warranty. It covers defect in material or workmanship; the hands, dial and watch movement are the only components covered under the warranty.  This warranty does not apply to normal wear and tear, abuse, lack of care or water damage and excludes batteries, case, strap or bracelet. The warranty does not cover costs, parts, labor defects or damage caused by misuse, accident, negligence, or impact.

Manufacturer defect related repairs which occur 90 day of purchase: US customers will be issued a free return label. Repairs requested after 90 days from purchase will incur shipping and handling fees.

If you have damaged your watch we will gladly fix it for you at cost to be determined by the Dusty Saw Service team.

To request service please contact us.